S 250 S 800

S 250 - S 600

BUFFING MACHINE WITH OSCILLATING CYLINDER MOD.S.250 - S.600

having the following characteristics:

A particularly robust base free from all vibrations.
An oscillating cylinder of wide diameter, in steel, dynamically balanced and fitted on roll-bearings of great strength and precision. The emery paper of standard height of 250 and 610 mm is simply wrapped straight on to this cylinder
The feed roller covered in special rubber, of differing thickness and quality according to the type of buffing to be done, guarantees a safe treatment of the skins and a perfect working due to its robust and precise construction.
The thickness regulation system, which is extremely simple and exact, allows tuning to be regulated by means of a knob, while successive regulations are made using a lever permitting decimal adjustments. This lever is situated in a very convenient position for the operator and can also be used during the working..
Safety device which at the opening of the buffing cylinder protection crankcase causes the immediate stop.
Dust removal is effected by an electro-exhauster of considerable power, which is incorporated into the machine. When the machine is offered with dusting filter, the electro-exhauster is not quoted being the same already incorporated into the filter.
All the electrical apparatus conforms to the very highest standards of safety.

MAIN FEATURES

		S 250	S 600
Working width	mm	250	600
Power of main motor	HP(Kw)	4 (3)	7,5 (5,5)
Power of electro-exhauster motor	HP(Kw)	3 (2,2)	3 (2,2)
Floor space	mm	1540x1030	1540x1360
Net weight	Kg	950	1150
Gross weight with sea package	Kg	1150	1400
Volume with sea package	m³(mm)	3,5 (1750x1250x H1600)	4,5 (1750x1600x H1600)

S 800

BUFFING MACHINE WITH OSCILLATING CYLINDER MOD.S.800

having the following characteristics:

Bearing structure particularly sturdy free of vibrations consisting of cast iron side panels connected by a steel bed.

Swinging steel buffing cylinder dynamically balanced and mounted on roller bearings of great sturdiness and precision. On this cylinder is wrapped in spirals abrasive paper of the standard height of 610 mm, kept stretched by an elongation automatic recovery device.

Resting cylinder with special rubber coat of different hardness and quality according to the kind of buffing to be performed, warranting a perfect work thanks to its sturdy and precise construction and sure skins transport.

Toothed clutch device to invert rotation of the support cylinder

Thickness regulation system, which is extremely simple and precise, allows tuning to be regulated by means of a knob; while successive regulations are made using a lever permitting decimal adjustments. This lever is situated in a very convenient position for the operator and can also be used while working.

Pneumatic safety barrier on the whole working area which controls the immediate stop of buffing and support cylinders.

Safety device which causes the immediate stop at opening of the buffing cylinder protection crankcase.

Total dust withdrawal system through an electro-exhauster of high power, built in the machine. When the machine is sold with dust filter the electro-exhauster is not more charged and it is incorporated in the filter.

Electrical equipment in totally closed cabinet with 24 Volts ancillary leads, in conformity with the international safety standards.

MAIN FEATURES

		S 800
Working width	mm	800
Power of main motor	HP(Kw)	10 (7,5)
Power of electro-exhauster motor	HP(Kw)	3 (2,2)
Floor space	mm	1540x1590
Net weight	Kg	1300
Gross weight with sea package	Kg	1550
Volume with sea package	m³(mm)	5,2 (1750x1850x H1600)

BACK

HOME PAGE