THROUGH-FEED OPEN-END FULL HYDRAULIC BUFFING MACHINES, WITH OSCILLATING CYLINDER
complete with fittings, with low conveyor, with automatic hide-braking device, with electric apparature, with safety device, with all electric motors, without electroexhauster.
Characteristics:
- Support structure, in welded steel, comprising boxed sides and connecting beams;
- Steel buffing cylinder offering large diameter and double stabilisation and balancing process, and turning on self-adjusting double-bearing supports. Emery paper with standard width 610 mm. is spiral-wound onto this roller and held at the correct tension by an automatic stretch-compensatory device.
- Support roller with special rubber coating, whose hardness and type vary depending on the buffing procedure;
- Mechanical drive for cylinder oscillating movement;
- Hydraulic opening and closing with all components installed in protected positions, running on rolling bearings:
- Opening and closing pedal, with gradual control or two set positions;
- Hydraulically operated feed system with speed continually adjustable from 0 to 28 m/1';
- Decimal regulation of thickness with read-off of value set;
- Device operating on both sides providing rapid adjustment by 3 tenths in either direction of the position of the support-roller in relation to the buffing cylinder;
- Automatic blending device both at beginning and at the end of each pass;
- Upper hide-retainer roller to ensure reliable feed with no effort from the operator;
- Automatic hide-braking device allows continuous processing with no damage to the last section of the hide;
- Total dust exhauster system with upper and lower suction intakes;
- Hide conveyor belt with option of hide offload to front or rear, hydraulically operated with speed automatically varied in relation to feed speed;
- Intrinsic operator safety devices throughout the processing zone with continual electronic monitoring of efficiency. The device opens the machine and stops the rollers by means of electro-magnetic disk brakes;
- Electrics housed in sealed cabinet with auxiliary voltage 24 Volts, complying with international safety standards;
- Without electroexhausters.
Mod. S 1200
| Working width | mm | 1200 |
| Power of main motor | HP(Kw) | 20÷25 (15÷18,5) |
| Pump motor power | HP(Kw) | 4 (3) |
| Floor space | mm | 1420x2700 |
| Net weight | Kg | 2800 |
| Gross weight with seapackage | Kg | 3200 |
| Volume with seapackage | m3 (mm) | 8,2 (1600x2900xH1750) |
Mod. S 1500
| Working width | mm | 1500 |
| Power of main motor | HP(Kw) | 25÷30 (18,5÷22) |
| Pump motor power | HP(Kw) | 4 (3) |
| Floor space | mm | 1420x3000 |
| Net weight | Kg | 3000 |
| Gross weight with seapackage | Kg | 3450 |
| Volume with seapackage | m3 (mm) | 9 (1600x3200xH1750) |
Mod. S 1800
| Working width | mm | 1800 |
| Power of main motor | HP(Kw) | 30 (22) |
| Pump motor power | HP(Kw) | 4 (3) |
| Floor space | mm | 1420x3300 |
| Net weight | Kg | 3200 |
| Gross weight with seapackage | Kg | 3700 |
| Volume with seapackage | m3 (mm) | 9,8 (1600x3500xH1750) |
